Siora Surgicals

Plates for 4.5 mm & 6.5 mm Screws
<< Back | Next >>

Straight Reconstruction plate - 4.5 mm		LC-DCP - 4.5 mm, Narrow

Profile Thickness - 2.8mm Width - 12.0mm Holes Spacing - 16.0mm		Fixation with 4.5 and 6.5 mm screws. The LC-DCP holes allow compression in both directions of the longitudinal axis. The end holes can be used for cancellous bone screws. Undercuts : For reduced vascular damage. Indication: As a neutralisation and tension band plate on the tibia (not intended for the femur). LC-DCP = Limited Contact Dynamic Compression Plate.
Cat No. Holes Length 149.105 5 77 mm 149.106 6 93 mm 149.107 7 109 mm 149.108 8 125 mm 149.109 9 141 mm 149.110 10 157 mm 149.112 12 189 mm 149.114 14 221 mm 149.116 16 253 mm 149.118 18 285 mm 149.120 20 317 mm 149.122 22 349 mm
		Profile Thickness - 4.6mm Width - 13.5mm Hole Spacing - 18.0mm
		Cat No. Holes Cat No. Holes 150-104 4 150-110 10 150-105 5 150-111 11 150-106 6 150-112 12 150-107 7 150-114 14 150-108 8 150-116 16 150-109 9
LC-DCP - 4.5 mm, Broad		Spoon Plate

Fixation with 4.5 and 6.5 mm screws. The LC-DCP holes allow compression in both directions of the longitudinal axis. The end holes can be used for cancellous bone screws. Undercuts : For reduced vascular damage. Indication: As a tension band plate on the Femur and for Humeral pseudarthrosis (not intended for the Tibia). LC-DCP = Limited Contact Dynamic Compression Plate.		Shaft with V-profile for the fixation on the frontal edge of the tibia. Fixation with 4.5 mm cortical screws.
		Profile Thickness - 3.0mm Head Width - 33.0mm
		Cat No. Holes Length 155-105 5 100 mm 155-106 6 120 mm
Profile Thickness - 6.0mm Width - 17.5mm Hole Spacing - 18.0mm
Cat No. Holes Cat No. Holes 151-104 4 151-112 12 151-105 5 151-113 13 151-106 6 151-114 14 151-107 7 151-115 15 151-108 8 151-116 16 151-109 9 151-117 17 151-110 10 151-118 18 151-111 11

Catalog Pages : -